Marine Industrial and Pump Control Level Switches
Cable Level Switch – FAC Series
The FAC series cable level switch makes use of a micro switch as the contact component. The switch will have an ON or OFF contact signal output when the angle is larger than 28 Degree Features Rugged float IP68 enclosure rating Neoprene…
Read moreLevel Switch – LF10CEM Horizontally Mounted Industrial/Marine Type
Large size, rugged and reliable, these level switches are designed for the demands of industrial and marine applications. Available with many options including different float types, stem lengths and connection types; a high temperature version is also available for temperatures…
Read moreLevel Switch – LF10CEQ Horizontally Mounted Industrial/Marine Type
Large size, rugged and reliable, these level switches are designed for the demands of industrial and marine applications. Available with many options including different float types, stem lengths and connection types; a high temperature version is also available for temperatures up to…
Read moreLevel Switch – LF40DFM Horizontally Mounted Industrial/Marine Type
Large size, rugged and reliable, these level switches are designed for the demands of industrial and marine applications. Available with many options including different float types, stem lengths and connection types; a high temperature version is also available for temperatures…
Read moreLevel Switch – LF50DFM Vertically Mounted Industrial/Marine Type
Large size, rugged and reliable, these level switches are designed for the demands of industrial and marine applications. Available with many options including different float types, stem lengths and connection types; a high temperature version is also available for temperatures…
Read moreLevel Switch – LS-240-3E Bilge Water Type
This bilge level switch has an extremely robust construction. It is perfectly suitable for applications on ships and wherever heavy mechanical loads occur. The LS-240-3E has been accepted by the Germanischer Lloyd, among others, and approved for application by the German…
Read moreLevel Switch – LS-270-E Bilge Water Type
This bilge water level switch has been developed especially for low level alarms and can monitor levels as low as 35 mm. As the cable is vulcanized the switch is submersible to IP67. The LS-270-E has been accepted by the…
Read moreLevel Switch – LS-750 Submersible Water Type
These units are ideal for use in oils and water. With a compact-sized float, slosh shield and weighted collar, the LS-750 level switch provides liquid level detection for a wide variety of applications. Suspend in stand pipes or sumps for…
Read moreConductive Probes – A03 Conductive Liquid Level Control
Electronic level controls with probes to control and monitor the level of conductive liquids. Suitable to control autoclave pumps, steam generator pumps, tanks filling and emptying etc. Fixing to rails of 35 mm EN 50022- 3 DIN 46277- 3 Case…
Read moreTank Level Switch – A70 Open Tank Type
Tank level switch for the control of filling and emptying via direct pump control, these switches are suitable for both single phase and three phase motors. [gview file="https://www.appeng.co.uk/wp-content/uploads/2013/01/A70-Open-tank-level-switch.pdf" height="303px" width="220px" save="1"]
Read moreLevel Switch – LS-700F Series Single-Point
Overfill protection for refrigerant tanks. The LS-700F level switch enables safe compliance with EPA directives to recover refrigerants. These units are designed to fit standard 30# and 50# D.O.T. approved refrigerant tanks. They provide 80% full shutoff capability when used…
Read moreRelays – LOAD-PAK, SPDT-PAK & FLIP-PAK
Non-Intrinsically Safe Relays Boost Your Sensor’s Load Handling Ability SPST, N.O. Operation AC or DC models Amplify current handling capability of sensors for controlling high power load Compact, polysulfone bodies are totally encapsulated Impervious to shock or vibration Solid-state reliability…
Read moreAbout our Marine Industrial and Pump Control Level Switches
At Applications Engineering, we specialise in providing high-quality components for every industrial application, including scaled-up parts that are rugged enough for marine-grade systems. Our range of marine industrial and pump control level switches are built to suit a range of applications in demanding environments and are constructed and tested for reliability in heavy-duty tasks.
The range of marine-grade level switches includes cable level switches, bilge water level switches and options for vertical or horizontal mounting. We also offer various float types, stem length and connection types to suit your exact engineering requirements. If you cannot find the type of component that you are looking for, please don’t hesitate to contact us to discuss options for cost-effective custom manufacturing.
