Flow Switches – Metal Body
Flow Switch – FS-105E Series-Adjustable Type
The FS-105E model flow switch operates in any mounting position. It is equipped with a calibrated piston which is displaced by flow to magnetically actuate a sealed hermetic reed switch. When flow decreases a positive spring returns the piston to its prior…
Read moreFlow Switch – FS-107E Adjustable Type Available with Visual Indication
The FS-107E model flow switch operates in any mounting position. It is equipped with a calibrated piston in a calibrated orifice for viscosity compensation over 30 to 600 cSt. The piston is displaced by flow to magnetically actuate a sealed…
Read moreFlow Switch – FS-200E-A Adjustable Type
The FS-200E flow switch offers accurate flow detection with 1% repeatability and European G1" port size. The durable construction delivers long life repeatability in either water or oil. The design of large flow paths keep pressure drop low, thus are…
Read moreFlow Switch – FS-925E / FS-926E Adjustable Type
These two series of precision-calibrated switches provides reliable and consistent performance; repeatability is within 1%. FS-925E and FS-926E units are factory preset for actuation at specified flow rates. This flow switch range provides accurate detection of excessive or insufficient flow rates in such…
Read moreFlow Switch – FS-10798E Adjustable Type
This externally adjustable flow switch is ideal for protecting machine tools from coolant flow failure, for protecting bearings from loss of lubricant or to assure proper air flow. They offer an infinite number of flow settings at pressures up to 1000 psig (69 bar),…
Read moreFlow Switch – FS-927 Series
Measuring only 1" x 2-3/4" (25 mm-70 mm), this compact flow switch is ideal for use where space is at a premium. Designed for use with water and oil, these switches are suitable for high volume OEM applications. They are ideal…
Read moreFlow Switch – FS-380 Series
This rugged inline flow switch uses 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The one-piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications such as industrial cleaning equipment. The FS-380 is…
Read moreFlow Switch – FS-480 Series
The FS-480 large-body inline flow switch delivers ample flow rates with minimal pressure drop. 25% larger than its FS-380 sibling, the FS-480 is ideal for processes that push more fluid through their systems and demand low pressure drops. Designed to…
Read morePaddle Flow Switch – FS-550(E) Series
For Flow/No-Flow Detection in Large Line Sizes The FS-550(E) paddle flow switch has been engineered for positive liquid flow detection at pressures up to 2000 psig (138 bar). Unique, patented cam design assures low pressure drop and does not require bellows, seals, or…
Read moreFlow Switch – SP Thermal Dispersion Range
The SP flow switch range is based on the principle of thermal dispersion. A typical configuration uses two temperature detectors set within the tip of the sensor, One detector is heated a few degrees above the other one; as the process…
Read moreFlow Switch – VHS/VH3 Range With Metal Tee
The Sika VHS/VH3 range of flow switches with threaded tee offer reliability and affordability in a proven and rugged all metal construction. The VHS comes with enclosed switching head and electrical connector DIN 43650A or M12 x 1 while the…
Read moreFlow Switch – VH0 Range
The Sika VH0 flow switch is similar in construction to the Sika VHS range but uses a micro switch in place of the reed switch which enables the VH0 to switch at much greater currents and therefore makes it ideal for…
Read moreFlow Switch – VHS/VH3 Range Insertion Type
The Sika VHS/VH3 insertion type flow switch is similar to the VHS/VH3 threaded tee type but the tee is removed and replaced with either a threaded G1/2" adaptor, a brass solder adaptor or a stainless steel weld-in adaptor. The VHS comes with enclosed…
Read moreFlow Switch – VHS06/VH306 Range With Trimmable Paddle
The VHS06/VK306 Sika flow switch has the advantage of the trimmable paddle which means it can be cut down to fit pipelines from DN200 to DN20 with switch points from 1.1 m3/h to 30 m3/h dependent on pipe size. Both…
Read moreFlow Switch – VHS09/VH309 Range With Trimmable Paddle
The VHS09/VK309 Sika flow switch has the advantage of the trimmable paddle which means it can be cut down to suit switch points from 2 m3/h to 10.9 m3/h dependent on pipe size. Both the VHS09 and the VK309 come with a…
Read moreFlow Switch – VKX15 Range For Potable Water
The Sika VKX15 is a simple and reliable flow switch for potable water applications and is particularly suited for OEM customers, they are available as a normally open switch with brass tee with threaded connections in either G1/2″or G3/4″, 15 or 22 mm…
Read moreFlow Switch – VH780 With Interchangeable Paddles
The Sika flow switch VH780 is an insertion type paddle switch with interchangeable paddle lengths suitable for pipe lines from DN32 up to DN200 with flow rates from 1.3 to 94.2 M3/h. This robust flow switch is available with either a…
Read moreFlow Switch – VH500 For Marine Applications
The Sika flow switch VH500 is an insertion type paddle switch with interchangeable paddle lengths suitable for pipe lines from DN25 up to DN50 with flow rates from 1 to 3.85 M3/h. This robust flow switch is available in brass with stainless…
Read moreAbout our Flow Switches – Metal Body
Metal flow switches can be found in a number of specific applications, including remote alarms and indicators. They can be paddle flow, adjustable or inline. These products are useful at operating the flow range of water, air, oil or gas in a process. Once you have selected the metal flow switches you require, or anything else included within our great value product range, simply get in touch with our team here at Applications Engineering and we will ensure your order is sent out to you straight away.
