Overfill protection for refrigerant tanks. The LS-700F level switch enables safe compliance with EPA directives to recover refrigerants. These units are designed to fit standard 30# and 50# D.O.T. approved…
Tank level switch for the control of filling and emptying via direct pump control, these switches are suitable for both single phase and three phase motors.
Electronic level controls with probes to control and monitor the level of conductive liquids. Suitable to control autoclave pumps, steam generator pumps, tanks filling and emptying etc. Fixing to rails…
These units are ideal for use in oils and water. With a compact-sized float, slosh shield and weighted collar, the LS-750 level switch provides liquid level detection for a wide…
This bilge water level switch has been developed especially for low level alarms and can monitor levels as low as 35 mm. As the cable is vulcanized the switch is…
This bilge level switch has an extremely robust construction. It is perfectly suitable for applications on ships and wherever heavy mechanical loads occur. The LS-240-3E has been accepted by the Germanischer…
Large size, rugged and reliable, these level switches are designed for the demands of industrial and marine applications. Available with many options including different float types, stem lengths and connection…
Large size, rugged and reliable, these level switches are designed for the demands of industrial and marine applications. Available with many options including different float types, stem lengths and connection…
Large size, rugged and reliable, these level switches are designed for the demands of industrial and marine applications. Available with many options including different float types, stem lengths and connection types; a…
Large size, rugged and reliable, these level switches are designed for the demands of industrial and marine applications. Available with many options including different float types, stem lengths and connection…
The FAC series cable level switch makes use of a micro switch as the contact component. The switch will have an ON or OFF contact signal output when the angle is larger…
Fantastic service! I called up and spoke to Sam who was super helpful and answered all my questions.
Highly satisfied!
At first, I wasn’t entirely sure what I needed to suit my requirements but after speaking to the team, I was much more clued up and knew what I needed, really great service.
Really happy with the service at Applications Engineering, Martin was brilliant and was really keen to assist me and answer my questions.
I needed advice and clarification on a few things and Andrea sorted it really quickly and efficiently.
Very helpful indeed!