| Max Voltage | 48Vac/dc |
| Current | 0.5(0.2)A |
| Piston (for high pressure) | AISI316 Stainless Steel |
| Temperature Range | -40c to +140c |
| Max Cycle Rate at 25c | 200/min (Diaphragm Type) |
| Max Cycle Rate at 25c | 80/min (Piston Type) |
| Switch Housing | Nylon 6,6 |
| Strength Test | 1500 v – 10 ma |
| Tightening Torque | max 5 Kgm |
This subminiature pressure switch is generally used to check the pressure either in oil or grease lubrication plants and hydraulic, pneumatic and water circuits. This pressure switch is designed with an hexagonal body, silver contacts, HBNR, NBR, Viton, EPDM or Silicone membrane, faston connection and springs to balance and adjust the pressure to be checked.
Pressure can be adjusted with the use of a small screwdriver, paying attention not to affect the spring
