PMN10A1/8K And PMN10A1/8KAP Pressure Switch


Max Voltage  48Vac/dc
Current  0.5(0.2)A
Piston (for high pressure)  AISI316 Stainless Steel
Temperature Range  -40c to +140c
Max Cycle Rate at 25c  200/min (Diaphragm Type)
Max Cycle Rate at 25c  80/min (Piston Type)
Switch Housing  Nylon 6,6
Strength Test  1500 v – 10 ma
Tightening Torque  max 5 Kgm


These subminiature pressure switches are used to check the pressure either in oil or grease lubrication plants and hydraulic, pneumatic and water circuits. This pressure switch is designed with an hexagonal body, silver contacts, HBNR, NBR, Viton, EPDM or Silicone membrane,  faston connection and springs to balance and adjust the pressure to be checked.

The pressure of the switch can be easily adjusted with the use of a screwdriver, paying attention not to damage the spring