Flow Sensor – Turbotron VT 25 Series
The VT 25 Series turbine flow sensor is designed for flow measurement or dosing applications for liquids, because of the very compact design, the very wide measuring range and the convincing precision of measurements, almost unlimited applications are possible. The extremely hard bearing materials – sapphire and tungsten carbide – also guarantee an exceptionally long endurance.
The liquid flowing into the turbine flow sensor is split into individual jets by the guiding blade, these jets hit the rotor evenly from different directions, setting the rotor in motion. The rotation speed of the rotor is then converted to an electrical pulse signal (frequency), the rotors are fitted with magnets and a Hall effect sensor detects the rotation of the rotor. Given the uniform inflow to the bearing, the forces largely cancel themselves out and wear is reduced to a minimum.
Technical Spec
| Body Material | VTH 25 - Plastic PP or Brass |
|---|---|
| VTM 25 - Brass or Stainless Steel | |
| VTI 25 - Plastic PP or Brass | |
| Signal Output | From 1 l/min |
| Output Signal | Square wave NPN open collector- VTH 25 and VTM 25 |
| Square wave PNP open collector - VTI 25 | |
| Power Supply | 10~30VDC - VTH 25 and VTI 25 |
| 6.5~24VDC - VTM 25 |
Related Categories
Advantages
- Hard wearing sapphire bearing
- Highly accurate
- Fixed pulse rate
- Can be installed in any position
- Rotor designed to reduce wear
Applications
- Monitoring cooling circuits in machine and plant engineering
- Water treatment
- Cleaning processes
- Dosing
